99 catalog 82004 dimensions are shown for dimensions are in inches and canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 3-11 reference purposes only. millimeters unless otherwise m exico/c. am.: +52 (0) 55-1106-0800 fr ance: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 net herlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 faston terminals (insulated and uninsulated) pidg faston receptacles and tabs pidg faston receptacles and tabs here is a pre-insulated terminal designed for complete and uniform reliability in most difficult circuit environments. each pidg terminal consists of a tin plated brass body with a specially designed copper sleeve and insulation sleeve fitted over the terminal barrel. the design of the tool dies and the construction of the terminal promotes uniform insulation thickness under crimping pressure, transmitting this pressure evenly to the center of the crimp area. te compression crimping produces crimps for a given size wire and terminal that are precisely alike in appearance and performance. this is a calculated result made possible by designing the terminal and the crimping tool as precisely matched devices. the dies are precision-engineered from the finest hard-metal alloys. crimping pressure is controlled by a ratchet device on the hand tool or a corresponding pre- calibration in the crimping temperature rating: 105 c wire e66717 lr7189 range recognized certified 22-16 22-16 stranded 300 v max., 16-14 16-14 stranded 12-10 12-10 stranded 105c max. 1 1 ul and csa ? nylon. jaws of te automated crimping machines. crimping pressure can neither over-stress nor understress the terminal barrel ? machined dies fully bottom to the precise crimp height required. the resulting termination is free of contamination, is resistant to shock and critical environments, and its tensile strength approaches that of the wire itself. product facts pre-insulated terminal designed for complete and uniform reliability in the most difficult circuit environment consists of an unplated or tin plated brass body or a tin plated phosphor bronze body with a specially designed copper sleeve and insulation sleeve fitted over the terminal barrel design of the tool dies and construction of the terminal insures uniform insulation thickness under crimping pressure, transmitting this pressure evenly to the center of the crimp area the te mated tool/terminal concept te compression crimping produces crimps for a given size wire and terminal that are precisely alike in appearance and performance terminal and the crimping tool are designed as precisely matched devices dies are precision- engineered from the finest hard-metal alloys crimping pressure is controlled by a ratchet device on the hand tool or a corresponding pre- calibration in the crimping jaws of te automated crimping machines the crimp crimping pressure does not overstress nor understress the terminal barrel ? machined dies fully bottom to the precise crimp height resulting termination is free of contamination resistant to most shock and critical environments tensile strength approaches that of the wire itself r r
100 catalog 82004 dimensions are shown for dimensions are in inches and canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 3-11 reference purposes only. millimeters unless otherwise m exico/c. am.: +52 (0) 55-1106-0800 fr ance: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 net herlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 pidg faston receptacles and tabs (continued) faston terminals (insulated and uninsulated) pidg faston receptacles and tabs receptacles related product data application tooling ? reference catalog 82042 for tooling receptacle style a ? no dimple with wire stop b ? dimple with wire stop c ? no dimple, no wire stop w l .250 series w l .205 series w l .187 series .110 series- standard w l .110 series- low insertion w l wire size dimensions terminal wire fits part numbers series circular mils style w l insulation insulation recept. stock tab loose tape strip [mm 2 ] nom. max. color diameter matl. thk. thk. piece mounted form max. red .140 brass .018 .032 640903-1* 640903-2 640902-1 22-18 b .300 .900 3.56 0.46 0.81 509-1,900 7.62 22.86 red .140 brass .018 .032 55675-1 2 55675-2 2 ? . [0.26-0.96] 3.56 0.46 0.81 16-14 .300 .900 .170 .018 .032 2,050-5,180 b blue brass 640905-1* 640905-2 640904-1 [1.04-2.62] 7.62 22.86 4.32 0.46 0.81 .250 14-12 green .250 brass .018 .032 42844-1* ? 42844-3 ? 60544-3 ? 3,831-6,470 1 b .300 1.012 6.35 0.46 0.81 [1.94-3.28] 7.62 25.70 green .250 phos. brz. .018 .032 42844-2* ? ? . ? . 6.35 0.46 0.81 yellow .250 brass .018 .032 640907-1* 640907-2 640906-1 12-10 b .300 1.012 6.35 0.46 0.81 5,180-13,100 7.62 25.70 yellow .250 phos. brz. .018 .032 61198-2 3 ? 61198-4 4 ? 61197-2 . [2.62-6.64] 6.35 0.46 0.81 22-18 .300 .900 .145 .016 .032 509-1,900 b red brass 184262-1 ? 184262-2 ? 184261-1 ? .250 [0.26-0.96] 7.62 22.86 3.68 0.41 0.81 low 16-14 .300 .900 .173 .016 .032 insertion 2,050-5,180 b blue brass 184265-1 ? 184265-2 ? 184264-1 ? [1.04-2.62] 7.62 22.86 4.39 0.41 0.81 .205 22-18 low 509-1,900 b .250 .800 red .135 brass .016 .020 696018-1 ? 696018-2 ? ? . insertion [0.26-0.96] 6.35 20.32 3.43 0.41 0.51 red .140 brass .016 .020 640909-1* 640909-2 640908-1 22-18 3.56 0.41 0.51 509-1,900 b .250 .800 red/black .140 brass .016 .020 640174-1 ? . ? . 6.35 20.32 3.56 0.41 0.51 .205 [0.26-0.96] red .140 brass .016 .032 640911-1* 640911-2 ? . 3.56 0.41 0.81 blue .170 brass .016 .020 640913-1* 640913-2 ? . 16-14 b .250 .800 4.32 0.41 0.51 2,050-5,180 6.35 20.32 blue .170 brass .016 .032 640915-1* 640915-2 ? . [1.04-2.62] 4.32 0.41 0.81 26-24 .230 .700 .082 .016 .020 238-475 b yellow brass 641321-1* ? 641321-2 ? 641320-1 ? [0.12-0.24] 5.84 17.78 2.08 0.41 0.51 .187 22-18 .230 .800 .140 .016 .020 509-1,900 b 5.84 20.32 red 3.56 brass 0.41 0.51 640917-1* 640917-2 640916-1 [0.26-0.96] ? not ul or csa approved or listed. 1 wire range is limited as noted. 3 requires tool 90276-2 * available in small packaging quantities. 2 unplated receptacle body. 4 requires die 58541-1 material insulation ? nylon receptacle body ? brass per astm b-36 or phosphor bronze per astm b-139 plating ? tin per mil-t-10727 except where noted. metallic sleeve ? copper per astm b-152 plating ? tin per mil-t-10727 note: all part numbers are rohs compliant.
101 catalog 82004 dimensions are shown for dimensions are in inches and canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 3-11 reference purposes only. millimeters unless otherwise m exico/c. am.: +52 (0) 55-1106-0800 fr ance: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 net herlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 pidg faston receptacles and tabs (continued) faston terminals (insulated and uninsulated) pidg faston receptacles and tabs receptacles (continued) .230 .800 blue .170 brass .016 .020 640919-1* 640919-2 640918-1 16-14 5.84 20.32 4.32 0.41 0.51 2,050-5,180 b .230 .900 blue .250 brass .016 .032 696108-1 ? 696108-2 ? ? . .187 [1.04-2.62] 5.84 22.86 6.35 0.41 0.81 16-14 509-1,900 b .235 .800 blue .170 brass .016 .032 184235-1 ? 184235-2 ? ? . [0.26-0.96] 5.84 20.32 4.32 0.41 0.81 .187 22-18 .020 696777-2 ? . 696776-1 low 509-1,900 b .230 .800 red .140 brass .016 0.51 insertion [0.26-0.96] 5.84 22.86 3.68 0.41 .032 184268-1 ? 184268-2 ? 184267-1 ? 0.81 .148 .734 natural .110 brass .012 .016 61048-1* ? 61048-2 ? ? . 3.76 18.64 2.79 0.30 0.41 .110 22-18 .148 .734 natural .110 brass .012 .020 61060-1* ? 61060-2 ? 61059-2 ? standard 509-1,900 b 3.76 18.64 2.79 0.30 0.51 [0.26-0.96] .148 .734 natural .110 brass .012 .032 60894-1* ? 60894-2 ? 60893-2 ? 3.76 18.64 2.79 0.30 0.81 26-24 .160 .700 .082 .016 .020 238-475 a yellow brass 641324-1 ? 641324-2 ? ? . [0.12-0.24] 4.06 17.78 2.08 0.41 0.51 .160 .796 red .140 brass .016 .012 ? . ? . 350871-1 ? 4.06 20.22 3.56 0.41 0.30 22-18 .016 640921-1 640921-2 ? . .110 509-1,900 a 0.41 low [0.26-0.96] .160 .800 red .140 brass .016 .020 640923-1* 640923-2 640922-1 insertion 4.06 20.32 3.56 0.41 0.51 .032 640925-1* 640925-2 640924-1 0.81 .020 640929-1* 640929-2 ? . a .160 .800 blue .170 brass .016 0.51 16-14 4.06 20.32 4.32 0.41 .032 640931-1* 640931-2 ? . 2,050-5,180 0.81 [1.04-2.62] b .160 .800 blue .170 brass .016 .016 640927-1 640927-2 ? . 4.06 20.32 4.32 0.41 0.41 ? not ul or csa approved or listed. *available in small packaging quantities. wire size dimensions terminal wire fits part numbers series circular mils style w l insulation insulation recept. stock tab loose tape strip [mm 2 ] nom. max. color diameter matl. thk. thk. piece mounted form max. note: all part numbers are rohs compliant. tooling for insulated faston receptacles and tabs ? 26 to 10 awg wire range tools for tape mounted terminations tools for strip form terminations wire size hand tool tape dies for tape dies for tape dies for ampomator 69875 amp-tapetronic amp-o-lectric 1 model ?g? ampomator cls iii g, cls iii g, cls iv no applicator required applicator 567200-3 cls iv applicator 687658-1 applicators 26-24 48518-2 69877-2 69877-2 69877-2 ? 22-18 59824-1 59826-1 59826-1* 59826-1 466788-3 2 22-18 90185-1 90248-2 90248-2 90248-2 466554-3 2 (natural) 16-14 59824-1 59827-1 59827-1* 59827-1 466789-3 2 14-12 90246-1 90240-2 90240-2 90240-2 ? 12-10 59824-1 59828-1 59828-1* 59828-1 466790-4 2 *only ul and csa approved. 1 amp-o-lectric model ?k? 565435-5 uses applicator 567200-2. 2 die included with applicator.
102 catalog 82004 dimensions are shown for dimensions are in inches and canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 3-11 reference purposes only. millimeters unless otherwise m exico/c. am.: +52 (0) 55-1106-0800 fr ance: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 net herlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 pidg faston receptacles and tabs (continued) faston terminals (insulated and uninsulated) pidg faston receptacles and tabs tab description wire ins. dia. dimensions material part number range max. wl e and finish 22-18 .157 .250 .866 .300 tin plated brass 696362-1 3.99 6.35 22.00 7.62 for receptacle 16-14 .197 .250 .866 .300 tin plated brass 696369-1 .250 x .032 5.00 6.35 22.00 7.62 12-10 .256 .250 .950 .300 tin plated brass 696372-1 6.50 6.35 24.13 7.62 w e l pidg faston flag receptacles w e l description wire ins. dia. dimensions material part number range max. wl e and finish 22-18 .134 .300 .720 .610 tin plated brass 156667-1 for tab 3.40 7.62 18.29 15.49 .250 x .032 16-14 .157 .300 .720 .610 tin plated brass 156666-1 3.99 7.62 18.29 15.49 positive lock receptacle low insertion force with locking device description wire ins. dia. dimensions material part number range max. wl e and finish for tab 16-14 .190 .362 .850 .315 tin plated brass 165536-1 ? .250 x .032 4.83 9.19 21.59 8.00 ? not ul or csa approved or listed. w e l note: all part numbers are rohs compliant.
103 catalog 82004 dimensions are shown for dimensions are in inches and canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 3-11 reference purposes only. millimeters unless otherwise m exico/c. am.: +52 (0) 55-1106-0800 fr ance: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 net herlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 pidg faston receptacles and tabs (continued) faston terminals (insulated and uninsulated) pidg faston receptacles and tabs fully insulated receptacles insulation sleeve ? nylon description wire ins. dia. dimensions material part number range range wl and finish 22-18 .128 .375 .891 tin plated brass 696357-1 3.25 9.53 22.63 for tab 16-14 .165 .375 .881 tin plated brass 696366-1 .250 x .032 4.19 9.53 22.38 12-10 .225 .375 .998 tin plated brass 696371-1 5.72 9.53 25.35 w l budget line pidg faston receptacles material insulation ? pvc, ul 94v-0 receptacle body ? brass plating ? tin metallic sleeve ? copper plating ? tin w l wire size dimensions wire fits part numbers series circular mils wl terminal insulation tab loose tape [mm 2 ] nom. nom. color diameter thk. piece mounted max. 22-18 .300 .819 red .150 .032 696301-1 696301-2 7.62 20.80 3.81 0.81 .250 16-14 .300 .819 blue .185 .032 696302-1 696302-2 7.62 20.80 4.70 0.81 note: all part numbers are rohs compliant.
|
